Wordsearch Generator Download

This software should run fine on most PCs, but the recommended requirements for the Wordsearch Generator from Stinkybear Software are:

- 500Mhz processor or above.
- 128Mb ram or above.
- Windows 98, 98SE, Me, 2000, XP, XP64, Vista x86 or Vista x64.
- 1024 X 768 resolution display or higher. (800 X 600 may work but is not supported)

The Stinkybear Wordsearch Generator requires .net framework 2.0 or above, this is installed on some later versions of Windows by default, (i.e. Vista) but if it isn't installed on your system then it is available from windows update, or directly from the Microsoft site: HERE
Without this software the Wordsearch Generator from Stinkybear Software will give errors when ran.

If you have an older version of the Wordsearch Generator from Stinkybear Software then clicking on the link below will download the latest version, but don't worry, it will not remove any wordlists that you have created Stinkybear has it covered.

NOTE: If you're here to download an update, please make sure the Wordsearch Generator from Stinkybear Software is not running, otherwise the install will fail.

Click on the next link to download, then select "run" or "open" and agree to any security questions that may be asked. The software will guide you through the setup. If your only option is to save then you will need to save to your desktop, then double click on the setup.exe found there.

Wordsearch Generator V1.310 Download Setup.exe- 17/11/2007

If you have any problems trying to download the setup.exe (usually due to a firewall) then you can download the zipped archive below.

Wordsearch Generator V1.310 Download Setup.zip- 17/11/2007

Once installed you can load the Wordsearch generator from Stinkybear Software from the desktop icon, or from the start menu.

If you have any problems, please report them to stinkybear@stinkybearsoftware.com